How to Measure Garage Door Springs

Imagine your garage door isn’t opening smoothly. Maybe it’s making strange sounds or feels uneven. Often, this happens because of worn-out springs. These springs help lift and lower the door.

But here’s the thing: if you don’t measure them correctly when replacing, you could run into trouble. The door might not lift properly, could strain your opener, or might even refuse to stay up. This can be both a hassle and a safety issue.

That’s why it’s so important to know how to measure garage door springs correctly. 

This guide will show you, in simple steps, how to measure both torsion and extension springs. 

Garage Door Springs: Torsion vs. Extension

 

  1. Torsion Springs
  • These springs are located horizontally above the door. They twist and store energy to help lift the door. Torsion springs are common in heavier doors and are typically more durable.
  1. Extension Springs
  • These springs run along each side of the garage door. This specific type of spring stretches and contracts as the door opens and closes. Basically, extension springs work best for lighter doors.

 

Safety First
Before you start measuring, make sure to:
Unplug the garage door opener.

Avoid this task if you feel unsure. Springs hold high tension and can be dangerous.

How to Measure Garage Door Springs (Torsion)

 

Measuring your garage door’s torsion springs is important if you need to replace them. Correct measurements ensure your new springs will work properly, lifting and lowering your door safely. 

As per your question, “How do I know what size garage door spring I need?” here’s an easy step-by-step guide to help you measure the winding direction, wire size, inside diameter, and length of your torsion springs.

Step 1: Find Out the Spring’s Wind Direction

Before measuring, check the spring’s wind direction. This matters because garage doors use both a left-wound and a right-wound spring. 

These two types work together to help the door open and close properly.

  • Look at the End of the Spring: If the end of the spring turns clockwise, it’s a left-wound spring. If it turns counterclockwise, it’s a right-wound spring.
  • Check for Colors: Many springs have color markings to show the winding. Torsion springs have two colors: Red usually means a right-wound spring, and black or dark colors mean a left-wound spring.

Official Color Codes for Torsion by DASMA

 

  • If the Springs Are Mounted on a Bar: You can also look at where the springs are mounted on the bar above the door. 
  • The left-wound spring is usually on the right side of the bar.
  • The right-wound spring is usually on the left side of the bar.

**Tip: The wind direction is essential because each spring has to turn the right way to help lift or lower the door. If the spring is installed with the wrong winding, the door won’t work right.

Step 2: Measure the Spring’s Wire Size

The wire size is the thickness of the spring wire. It’s important because it affects how tight or loose the spring is. 

Here’s how to measure it:

  1. Measure the Coils:

Lay the spring flat on a table.

Use a tape measure to measure 10 or 20 coils in a row.

  1. Use a Wire Size Chart: 

Compare your measurement to a chart. 

For example:

  • If 10 coils measure 1 1/4 inches, or 20 coils measure 2 1/2 inches, the wire size is 0.125.
  1. Why Not Use Calipers?
  • Calipers may not give an accurate reading because rust, paint, or other coatings on the spring can affect the measurement. Measuring the coils is a more accurate way to find the wire size.

Garage Door Torsion Wire Size Chart

 

 

Garage-Door-Torsion-Wire-Size-Chart

Here’s a simplified chart for your reference. Use the length of 10 or 20 coils to find your wire size.

**This chart is based on DASMA (Door & Access Systems Manufacturers Association) standards, so it should apply to most garage door torsion springs.

Step 3: Measure the Inside Diameter (ID) of the Spring

The inside diameter (ID) tells you the size of the spring. 

You can find it in two ways:

  • Look for Markings: Check the stationary cone for numbers like “1.75” or “2.0.” These numbers show the inside diameter.
  • Measure Manually: If there are no markings, place the spring flat and measure the distance across the interior of the coil. Be as precise as possible, rounding to the nearest 1/16 of an inch.

Step 4: Measure the Overall Length of the Spring

The overall length affects how much weight the spring can lift. 

To measure:

  • Lay the Spring Flat: Put the spring on a flat surface and stretch it out, but don’t overstretch it.
  • Measure from End to End: Use a tape measure to find the full length. Round to the nearest 1/4 inch.
  • For Broken Springs: If the spring is broken, you may need to measure each half separately and add the two measurements together for an accurate total length.

Why These Measurements Matter

The measurements—wind direction, wire size, inside diameter, and length—affect how much weight the spring can handle and how long it will last. 

If you use the wrong size spring, the door might not move right, the spring could wear out too fast, or it could break.

Safety Tips for Handling Torsion Springs

Torsion springs are very dangerous because they hold a lot of tension. 

Follow these safety tips:

  • Disconnect the Opener: Always disconnect the door opener before working on the springs.
  • Release Tension Carefully: Use a winding bar to slowly release tension. Don’t try this without the right tools or experience.
  • Don’t Touch the Screws or Bolts: Never adjust the screws or bolts while the spring is under tension to avoid accidents. If you’re unsure or feel uncomfortable, it’s best to call a professional to handle the spring replacement safely.

How to Measure Garage Door Springs (Extension)

How to Measure Garage Door Springs Extension

So, how do you measure replacement springs, especially extension springs? 

Measuring garage door extension springs is important to get the right replacement springs. You will need to measure the spring’s length, coil diameter, and wire size. 

Here’s how you can do it step-by-step.

Step 1: Disconnect the Power

Turn off the power to the garage door opener. This ensures safety when you work on the door.

Step 2: Secure the Door

Make sure the garage door is closed and stable. You don’t want the door moving while you measure.

Step 3: Measure the Length of the Spring

Now, measure the length of the spring when it’s fully stretched out (with the door closed). Use a tape measure to get the length from one end of the spring to the other.

Step 4: Measure the Diameter of the Coil

To measure the diameter, use a ruler or caliper to find the widest part of the spring coil. Measure across the middle of the coil. This tells you the thickness of the coils.

Step 5: Measure the Wire Size

Use a micrometer or a wire gauge tool to measure the thickness of the wire. This is important for determining how strong the spring is.

Additional Measurements: Door Weight and Color Code

Before you order new extension springs, you also need to know your garage door’s weight and the spring’s color code (if available).

Step 6: Measure the Door Weight

To measure the door weight, follow these steps:

  • Release tension from the springs: Make sure the cables are loose or disconnected so the springs are not under tension.
  • Use a bathroom scale: Place the door on the scale to find the weight. You might need help to hold the door still.

Step 7: Check the Color Code

Many garage door springs have a color code. The color tells you the weight range the spring is designed for. If you can’t find the color, you’ll need the door weight to determine the correct spring size.

Extension Spring Weight Chart

Extension-Spring-Weight-Chart

Here is a simple chart to help you determine the weight capacity of your spring based on the color code:

Step 8: Choose the Right End Type

When you order new springs, pick the right type of ends. The most common and best option is double-looped ends. These ends fit most garage doors and are easy to install.

Final Tips for Measuring Garage Door Springs

✅Double-check all measurements. Precision matters here.

✅Consult a professional if you’re unsure. Springs are under high tension and can be risky to handle.

✅Use a ruler or calipers for better accuracy, especially with the wire size.

Besides, you can check out this blog to learn the common mistakes to avoid during Garage Door Spring Replacement.

Garage Door Spring Replacement Service in Dallas, USA

If your garage door isn’t working well or won’t open, it could be due to old, worn-out springs. Springs help lift and lower your garage door safely. Over time, these springs can wear out from daily use and weather, which makes it hard or even unsafe to use your garage door.

At Garage Door Repair Dallas, TX, we specialize in replacing garage door springs. We’ll make sure your garage door works smoothly and safely again.

Important Things to Know About Garage Door Spring Replacement

If you’re thinking about replacing your garage door springs, here are some simple tips:

  • Type of Springs: Your garage door may use extension springs or torsion springs, and each type works a little differently. Our team can help you find the right springs for your door.
  • Quality Springs: If you want springs that last, quality is key. We use strong, long-lasting springs designed for daily use, so your door works well for a long time.
  • Professional Installation: If you want a safe installation, leave it to experts. Replacing springs needs special tools and skills. Our experienced team can replace your springs safely so your garage door works perfectly.

When you pick us for spring replacement, you get safety, quality, and professionalism every time.

If you need garage door spring replacement in Dallas, contact us to schedule an appointment. We’re here to make sure your door is safe and works smoothly!

Wrapping Up

Hopefully, you now have a pretty good idea of how to measure garage door springs. By following these above steps, you can accurately measure your garage door springs and ensure you order the correct replacement parts.

If you want, you can check out this blog to learn about the garage door spring replacement cost.

 

FAQs

 

  • How to measure a garage door spring with a tape measure? 

To measure a garage door torsion spring, lay it flat and measure the space across 10 coils and then 20 coils with a tape measure. 

Use these numbers to find the wire size on a wire chart that we mentioned above. For extension springs, measure the length and width of the spring and check the color code mentioned above to see its weight capacity.

  • How often should I replace my garage door springs?

There’s no set timeline, but it’s a good idea to check your garage door springs once a year. Look for signs like rust, cracks, or if the spring feels less tight. 

These are signs it might be time to replace or repair them.

  • Can I replace the garage door springs myself?

Replacing garage door springs is risky and needs special tools and know-how. It’s best to hire a professional to make sure the job is done safely and correctly.

  • What is the average life of a garage door spring?

The average lifespan of a garage door spring is 7-10 years. However, factors like usage, weather conditions, and maintenance can influence its lifespan.

  • Can I reuse old garage door springs?

It’s not a good idea to reuse old garage door springs. Worn springs can make your garage door unsafe and less effective.

Call Us Now